Water Bath Shaker

LABCO Brand Water Bath Shaker with the following specifications:

The water bath shaker is required for the holding & shaking of 20 litre (02 nos) or 10 litre (04 nos) borosilicate glass bottles to inactivate pertussis antigen at 60°C. This water bath shaker should comply norms to install inside cGMP compliant facility.

  1. Dimension:
    1. External (Lx W x H): 106 x 73 x 43 cm
    2. Inner cabinet (Lx W x H): 68 x 64 x 42 cm
    3. Removable bottle holder: (Lx Wx H): 57 × 57 x 37 cm
    4. Diameter of glass bottle holder clamp: 20L : 310 mm & 10 L : 240 mm.
  2. Diameter of glass bottles: 20L : 300 mm & 10 L : 230 mm.
  3. No. of Bottle holding Clamps: 20 L = 2 nos. OR 10 L = 4 nos.
  4. Maximum Bath volume: 180 L
  5. Shaking platform is able to bear the weight (100 Kg) and shake bottles (4 × 25 Kg).
  6. Temperature range: Ambient (+5°C) to 90°C.
  7. Temperature Uniformity: ±0.1°C
  8. Temperature Accuracy: ±0.1°C
  9. Temperature Increment: ±0.5°C
  10. MOC:
    1. Outer: Powder coated MS
    2. Inner: SS 304
    3. Lid cover: SS304 with rubber gasket
    4. High grade insulation (Glass wool) on all sides for minimal temperature loss
    5. Nonvolatile material
  11. Heat up time: Rapid with two booster heating coils installed in the bottom.
  12. Display & Control: Microprocessor based digital control digital display via soft touch keypad.
  13. Orbital Shaking Speed: Adjustable 30 – 100 rpm with low noise and minimal vibrations
  14. Orbital shaking speed deviation: ±2% of set RPM. Shaking increment: 01 RPM
  15. Motor: Brushless DC with stepless regulator fitted  at the bottom of the shaking platform. Amplitude: 40±10 mm
  16. Movement of the shaker is Triple Eccentric Counter balanced drive
  17. We are an ISO 9001 : 2015 company
  18. Water Drain: At the bottom side with closed valve.
  19. Safety: Over-current cut off; restart of pre-set speed after power failure.
  20. The Water Bath shaker is equipped with heavy duty lockable wheels and anti-vibration rubber pads for immobilization.
  21. Power supply: 230±10 V; 50 – 60 Hz single phase.
  22. Warranty: 03 Years.
  23. IQ, OQ and PQ certificate will be provided at the time of installation.